E176FP

Screen type: Active matrix - TFT LCD

Screen dimensions: 17 inches (17-inch diagonal viewable image size)

Preset display area: Horizontal 13.3 inches; Vertical 10.6 inches

Pixel pitch: 0.264 mm x 0.264 mm

Viewing angle: Viewing angle 120 (vertical) typ, 140 (horizontal) typ

Luminance output: 300 cd/m(typ)

Contrast ratio: 450:1 (typ)

Faceplate coating: Antiglare with hard-coating 3H

Backlight: 4 CCFLs backlight

Response Time: 12 ms typical (Black to White)

Horizontal scan range: 30 kHz to 81 kHz (automatic)

Vertical scan range: 56 Hz to 76 Hz

Optimal preset resolution: 1280 x 1024 at 60 Hz

Highest preset resolution 1280 x 1024 at 75 Hz

Video input signals: Analog RGB - 0.7 Volts +/-5%, 75 ohm input impedance

Synchronization input signals: Separate horizontal and vertical synchronizations, 3.3V Cmos or 5V TTL level, positive or negative sync

Power AC input voltage / frequency / current: 100 to 240 VAC / 50 or 60 Hz / 1.5A (RMS) Max.

Inrush Current: 110V - 30A (Max.); 220V - 60A (Max.)

Signal cable type: D-sub: Detachable, Analog, 15pin, blue connector, attached to the monitor

Dimensions (with stand): Height 14.95 inches; Width 14.75 inches; Depth 5.4 inches;

Weight: Monitor (Stand and Head) 11.5 lb; Monitor Flat panel only (VESA Mode) 8.8 lb